HL450 Laser Receiver with Adapter
Digital Readout of Elevation allows faster readings
Anti-Strobe Sensor stops construction strobe lights from setting off
Large reception height allows faster readings
Durable in tough environments provides less downtime
Full Kit Contents:
- HL450 Receiver
- Adapter C45 for Receiver
- 2 x AA-Batteries
- Operating Manual
No one needs a laser receiver that’s easily distracted on the job site.
The patented anti-strobe filter eliminates false readings from LED lights that are commonly found on the job site such as vehicle hazard warning strobe lights. And with the digital readout models which have the prefix HL, you do not even need to get the receiver to the on-grade position because it displays how far from on-grade you are – allowing you to work faster and more accurately. You can quickly estimate how much material you need to cut or fill.
Specifications
Working Radius
(Laser Dependent)
1 – 200 m (3 – 650 ft)
Laser Detection Height
102 mm (4“)
Numeric Readout Height
76 mm (3“)
Accuracy
(Dead-band)
Fine 1.0 mm 0.05 in 1/16 in
Medium 5.0 mm 0.20 in 1/4 in
Calibration 0.1 mm 0.01 in 1/64 in
Reception Angle
± 45° minimum
Battery Life
70+ hours
Environmental
Waterproof, Dust-proof to IP67
Detectable Spectrum
610 nm … 900 nm
Beeper Volumes
Loud = 100+ dBA
Low = 65 dBA
Power Supply
2 x 1.5 Volt “AA” batteries
Dimensions
168.0 x 76.0 x 36.0 mm (6.6” x 3.0” x 1.4”)
Operating Temperature
-20°C…+60°C (-4°F… +140°F)
Storage Temperature
-40°C…+70°C (-40°F…+158°F)
Automatic Shut-Off
30 min